For orchards, vineyards and high-value crops
Use a full cone nozzle to achieve even spray distribution. Apply FireHawk Bioherbicide so the entire plant is thoroughly wet, covering all green leaf surfaces uniformly. Because FireHawk works on contact, only the plant tissue coated with the spray will be affected—complete coverage is key for consistent results.
FireHawk Bioherbicide is an emulsifiable concentrate. Shake well before use, and maintain agitation during application to keep the solution properly mixed. For sprayers without continuous agitation, stop periodically to re-mix—without agitation.
As a contact bioherbicide, FireHawk performance is driven by application quality and spray coverage.
For optimum performance:
- Thoroughly cover exposed plant surfaces.
- Ensure adequate penetration into target vegetation.
- Select spray volumes appropriate for canopy density.
- Match application practices to weed size, growth stage, and environmental conditions.
Because contact herbicides only affect treated plant tissue, complete and uniform coverage remains the most important factor influencing performance.
From weed management and vegetative burndown to harvest aid and crop desiccation programs, FireHawk delivers professional-grade contact bioherbicide performance for modern agricultural operations.
Precision Where It Matters.
Fast Visible Burndown. Professional
Agricultural Performance.
FireHawk is a contact, non‑selective, broad‑spectrum, foliar‑applied herbicide. It only affects plant tissue that is directly coated with spray solution and is not translocated.
- Apply to actively growing, young, succulent weeds
- Avoid applications when weeds are wet
- Avoid applications if rainfall or irrigation is expected within 2 hours
- Cool weather slows activity
- Boom equipment: 75–100 GPA
- Spot/handheld: ~100 GPA equivalent
- Minimum: 20 GPA for foliar applications
- 1.5–3.2%: annual weeds, mosses
- 1.5–4.8%: perennial weeds, sucker growth
- 3.2–4.8%: maximum burndown, edging, woody vegetation
Diluted product:
- Long‑sleeved shirt, long pants
- Shoes + socks
Concentrated product:
- Coveralls
- Chemical‑resistant gloves (barrier laminate, nitrile, rubber, neoprene)
- Chemical‑resistant footwear
- Protective eyewear
Closed systems, enclosed cabs, or aircraft meeting WPS requirements may reduce PPE.
- FireHawk is subject to WPS when used on agricultural plants
- Restricted Entry Interval (REI): 12 hours
- Early entry requires coveralls, chemical‑resistant gloves, chemical‑resistant footwear, and protective eyewear
Yes, but only with compatible products and never with products that prohibit mixing.
Follow this sequence:
- Wettable powders
- Flowables
- Emulsifiable concentrates
- FireHawk
- Water‑soluble liquids
- Adjuvants
Compatibility must be tested before mixing. Read full label instructions.
No.
Use coarse droplets (solid cone or flat fan at low pressure) to minimize drift. Avoid fine droplets or mist.
- Avoid drift to desirable vegetation
- Do not apply when wind favors off‑target movement
- Keep people, pets, and livestock off treated areas until dry
- Fill tank ¾ with water
- Add FireHawk
- Add remaining water
- Maintain agitation throughout
- See label for more information
Clean tank, pump, and lines thoroughly with water after use.
- Do not apply directly to water
- Do not contaminate water during disposal
- Do not apply to wet weeds
- Do not apply if rain is expected within 2 hours
FireHawk containers are non‑refillable and must be triple‑rinsed or pressure‑rinsed before disposal or recycling.
